Printronix Auto ID T800 Series Administrator's Manual page 142

Application > PGL Setup > Host Form Length
Determines how Media > Image > Label Length is affected upon receiving
an EXECUTE command.
The physical label length will change to match the form
length (specified in CREATE command). The physical
Enable label size remains at the new setting until another
EXECUTE command is received, or the PRINTER
CONTROL menu settings are changed.
The physical label length is the longest element
defined in CREATE mode. Works with
Var. Length
CREATE;NAME;0. This includes all dynamic elements
whether used in EXECUTE mode or not.
The physical label length will change to the longest
print element used in EXECUTE mode plus the setting
Var Dynamic
of "Var Form Adjust." Works with CREATE;NAME;0. If
Len
dynamic elements are not used in EXECUTE mode,
they are not included.
Forms printed in EXECUTE mode do not change the
physical label size. Therefore, the size of the form
Disable
(defined in CREATE mode) must fit within the current
label dimensions, or errors may be reported.
Factory Default Enable
Changing the form length via the EXECUTE
IMPORTANT
command changes the LP+ Emulation logical
dimensions.
Application > PGL Setup > Var Form Adjust
This specifies an amount (in tenths of inches) to add to the length of
variable- length forms. Variable-length forms use a semicolon at the end of
the CREATE command: ~CREATE;<FORMNAME>;0.
Typically, variable-length forms are determined by the elements within the
form. The longest form element becomes the overall form length. This option
allows an additional space to be added to the form length.
Minimum 0.0 inches
Maximum 3.0 inches
Factory Default 0.0 inches
142