Printronix Auto ID T800 Series Administrator's Manual page 108

Table 3. Response for Series1 Char
Printer State
ONLINE and Buffer Empty
ONLINE and Buffer Full
OFFLINE and Buffer Empty
OFFLINE and Buffer Full
Table 4. Response for ENQ / ACK
ONLINE
ONLINE or Paper Motion Fault
Platen Open or Paper Out
Host IO > Serial Port > Request to Send
This configuration is part of hardware flow control and determines when the
Request to Send (RTS) signal is generated. This signal indicates whether or
not the printer is ready to receive data.
True Continuously asserts the RTS signal.
On-Line and Asserts the RTS signal when the printer is ONLINE
BNF and the internal serial buffer is not full (BNF).
Asserts the RTS signal when the printer is OFFLINE or
Off-Line or BF
the internal serial buffer is full
On-line Asserts the RTS signal when the printer is ONLINE
False Never asserts the RTS signal.
Factory Default On-Line and BNF
If the menu Flow Control is set to Software Only
IMPORTANT
when this menu will be hidden.
Series1 1 Char
Response
CR
3
0
2
Printer State
Series1 2 Char
Response
1 CR
3 CR
0 CR
2 CR
Status
40 06
43
47
108