Printronix Auto ID T800 Series Administrator's Manual page 118

Network > Ethernet > DHCP
You can enable/disable the DHCP protocol using this option, but consult
your administrator for the appropriate setting.
DHCP is disabled and you set your own static IP
Disable
address, subnet mask, and gateway address.
DHCP is enabled and IP address, subnet mask, and
Enable
gateway address is assigned dynamically.
Factory Default Enable
IMPORTANT If changed, the printer reboots when it is placed
ONLINE.
Network > Ethernet > BootP
You can enable/disable the BootP protocol using this option, but consult
your administrator for the appropriate setting.
Disable BootP is disabled.
Enable BootP is enabled.
Factory Default Disable
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
118