Tools > Diagnostics - Printronix Auto ID T800 Series Administrator's Manual

Barcode Demo
2D
Novram Err Log
Print Quality
Factory Default
This item selects the number of times the selected test pattern will be
printed.
Continuous
Selections
Factory Default
Tools > Diagnostics
This executable menu prints the current log of errors. Most non-routine faults
(RIBBON FAULT, PRINT HEAD HOT) are stored in the error log.
This executable menu clears the error log.
Tools > Print Tests > Run Tests
Prints picket, ladder, and 2-D barcodes with the
barcodes positioned at the left and right margins of the
standard label media supplied with the printer.
NOTE: The printer is automatically put ONLINE before
printing begins.
Prints detailed information about the most recent
Novram related failure. This option is useful when the
control panel faults with "Bad NVM" or "ILL NVM" type
errors. Contact the Customer Support Center if
such an error occurs.
Prints various patterns on one page that help in the
assessment of print quality, including Grey,
Checkerboard, and text. Number of patterns depends
on the current form length. This test should be run on
at least 6-inch media for the full test print.
Auto Calibrate
Tools > Print Tests > Test Count
Print continuously until the user stops the test by
printing the ENTER key.
Choose among 1 Page, 2 Pages, 5 Pages, or 10
Pages.
Continuous
Tools > Diagnostics > Print Error Log
Tools > Diagnostics > Clear Error Log
183