Printronix Auto ID T800 Series Administrator's Manual page 154

Application > LP+ Setup > Top Margin
Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
Minimum 0 linespaces
Maximum 451 linespaces
Factory Default 0 linespaces
Application > LP+ Setup > Bottom Margin
Defined in linespaces, starting from line zero at the bottom of the page and
incrementing from the bottom up.
Minimum 0 line spaces
Maximum 451 line spaces
Factory Default 0 line spaces
Application > LP+ Setup > Print Char. Set
Selecting this executable menu by pressing the
printer to print the currently selected character set.
Application > LP+ Setup > Reset Cmd CFG Ld
When the printer receives a host data stream reset command (ESC @ or
ESC[K) in addition to resetting printer variables, the selected configuration is
loaded.
The active emulation parameters are loaded when the
Disable
reset command is executed.
Power up The power-up configuration is loaded when the reset
Config command is executed.
The currently selected configuration is loaded when
Current config
the reset command is executed.
The factory installed configuration is loaded when the
Factory config
reset command is executed.
Factory Default Disable

ENTER key causes the
154