Printronix Auto ID T800 Series Administrator's Manual page 174

Application > Epson FX Setup > Epson Set
Application > Epson FX Setup > Multinational
One of these menus may be available when the Character Group is
Standard Sets. The menu bolded in the right column below is unhidden and
will have options with defaults marked (*). If the Character Set option is not
shown in the left column, none of these menus is available.
Epson Set
Character Set =
ASCII (USA) *, French, German, English, Danish I,
Epson Set
Swedish, Italian, Spanish I, Japanese, Norwegian,
Danish II, Latin Am II, French Canadian, Latin Am I
Multinational
Character Set =
Multinational
ASCII (USA) *, EBCDIC
Factory Default As shown with asterisk (*).
Application > Epson FX Setup > Horizontal DPI
This feature enables the thermal printer to print images as close as possible
to the same size as those originally programmed for a line matrix or laser
printer by selecting a horizontal resolution that matches that of the printer
that the file was originally generated for.
Although the range allows a selection of up to 400 dpi, the T800 is capable of
printing up to 203 dpi or 300 dpi horizontal resolution, depending on the print
head installed.
Minimum 60
Maximum 400
Factory Default 120
Application > Epson FX Setup > Vertical DPI
This feature enables the thermal printer to print images as close as possible
to the same size as those originally programmed for a line matrix or laser
printer by selecting a vertical resolution that matches that of the printer that
the file was originally generated for.
Although the range allows a selection of up to 400 dpi, the T800 is capable of
printing up to 203 dpi or 300 dpi vertical resolution, depending on the print
head installed.
Minimum 72
Maximum 400
Factory Default 72
174