Application > Pgl Setup - Printronix Auto ID T800 Series Administrator's Manual

Allows you to choose how the PJL (Printer Job Language) protocol is
handled in the printer when sending jobs through the Active IGP Emulation
or LP+.
Disable
Enable
Factory Default
Application > PGL Setup
IMPORTANT
The PGL Setup submenu will only be present when the Active IGP Emulation is
set to PGL. Otherwise, this menu will be replaced with the Active IGP Emulation
Setup menu.
This option selects the Character Set Group. Based on the group selected,
the character set can be chosen with the menu following XXX Sets. The
group Standard Sets is shown below because it is unique to PGL. All other
groups are similar and described in their respective Programmers
Reference Manuals.
This option will show when menu Character Group is set to Standard Sets.
Standard Sets
Factory Default
Application > Control > PJL Control
PJL commands will be ignored and processed like
other emulation data.
PJL commands will be processed.
Disable
Application > PGL Setup > Character Group
Application > PGL Setup > Standard Sets
0) ASCII
1) German
2) Swedish
3) Danish
4) Norwegian
5) Finnish
6) English
7) Dutch
8) French
0) ASCII
9) Spanish
10) Italian
11) Turkish
12) CP 437
13) CP 850
14-15) Reserved
16-23 Dwn Overlay
24-31) User Def.
139