Printronix Auto ID T800 Series Administrator's Manual page 123

Network > WLAN Params > Internat. Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe.
Disable International Mode is disabled.
Enable International Mode is enabled
Factory Default Disable
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
Network > WLAN Params > Auth. Method
The wireless authentication scheme.
This option allows all devices that have the
Open authentication algorithm number for open system to
navigate.
This option enables a four step authentication process
Shared
using secure or encrypted text by means of WEP.
Factory Default Open
If changed, the printer reboots when it is placed
IMPORTANT
ONLINE.
Network > WLAN Params > WEP Key 1 Format
Allows you to format WEP Key 1 in ASCII or hexadecimal code.
ASCII Allows you to format WEP Key 1 in ASCII format.
Hexadecimal Allows you to format WEP Key 1 in hexadecimal format.
Factory Default Hexadecimal
Network > WLAN Params > WEP Key 1 Width
This is the encryption strength. The options are 40 bits and 128 bits: 40 bits
are weaker and 128 bits are stronger.
40 bits Allows you to use 40 bit encryption for WEP Key 1.
128 bits Allows you to use 128 bit encryption for WEP Key 1.
Factory Default 128 bits
123