Loading Ribbon
For direct thermal media (no ribbon required), go to "Loading Media" section.
IMPORTANT
Clean the printhead, platen roller, and media sensors every time you change the
ribbon. See Cleaning the Printhead, Platen Roller, Media Sensors/Damper.
1. Open the printer top cover by pulling the blue levers, located on each side, toward the front of the
printer, then lift the top cover.
2. T800 supports 3 kinds of paper core for ribbon.
▪
For 1 inch paper core without notches, please insert the ribbon spindles into the paper core and
ribbon.
▪
For 1 inch & 0.5 inch paper core with notches, do not need to install the ribbon spindles.
Note: Please follow the direction when
installing the ribbon spindle.
28