Application > Epson FX Setup > Printer Select
Determines if control codes DC1 and DC3 will ignored or used to disable or
enable the printer, respectively.
Disable
Ignores the ASCII DC1 and DC3 control codes.
Disables the printer when control code DC1 is received
Enable
and enables the printer when DC3 is received.
Factory Default
Disable
Application > Epson FX Setup > 20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications where you need to print the maximum amount
of information on a page.
Does not compress print widths, even if condensed
Disable
print is chosen by the host.
Prints about 60% of the width of normal characters
Enable
when compressed print is chosen by the host
computer.
Factory Default
Enable
Application > Epson FX Setup > Alt. Set 80-9F
Determines how data in the range 80 hex – 9F hex will be treated.
Control Code
Interprets as a control code.
Printable
Prints data in this range.
Factory Default
Control Code.
176