Printronix Auto ID T800 Series Administrator's Manual page 69

Media > Handling > Media Handling
This option specifies how the printer will handle the media (labels or tag
stock).
Printer prints on the media and sends it out the front
Tear-Off Strip until the print buffer is empty, then positions the last
label over the tear bar for removal.
Prints and peels die-cut labels from the liner without
assistance. The printer waits for you to take away the
label before printing the next one (on-demand
printing). When the optional internal rewinder is
installed with liner attached, a "Remove Label"
message will display to remind you to remove the label
Peel-Off
before the next one can be printed. See Label Peel-Off
and Media > Handling > Peel Present on page 67 for
more information.
Not allowed if the cutter is installed. The error message
"INCOMPATIBLE WITH CUTTER" displays.
When the optional media cutter is installed, it
automatically cuts media after each label is printed or
after a specified number of labels have been printed
when a cut command from the host has been issued. It
Cut
cuts continuous roll paper, labels, or tag stock.
Only allowed when the cutter is installed. The error
message "OPTION NOT INSTALLED" displays
otherwise.
Printer prints on the media and sends it out the front.
Continuous
See Media > Handling > Continuous Mode on page 67.
Factory Default Tear-Off Strip
69