Online Screen - Printronix Auto ID T800 Series Administrator's Manual

Online Screen

When the printer is ONLINE and ready to receive data, the ONLINE screen is shown. By default, this will
be the first screen the user sees after the power-up process has completed. In order to demonstrate the
full features of the ONLINE Screen, the following options are assumed:
•
Model T820 (203 DPI)
•
Network is installed and IP is set
•
Wi-Fi is installed and IP is set
•
The printer has a Network Printer Name
•
The Media > Handling > Print Mode is set to Transfer (ribbons).
•
RFID is installed and enabled
The Active Configuration has been saved under a custom name "Warehouse"
•
•
The menu option under System > Control > Batch Counter is enabled.
The illustration above has labels associated with each of the ONLINE screen features which are described
in the table below. Notice there are differences for the wired Ethernet and wireless ONLINE screens.
Item
The full model name includes the printer width and DPI.
1
The Network Printer Name can be set via telnet, SNMP, or the webpage
2
and is used with Ethernet or WLAN features.
The Ethernet IP address is displayed if the IP address is set (non-zero).
3
The active IGP Emulation and the active Host IO (based on last job).
4
This area is reserved for messages such as receiving data, batch
5
counters, and job status.
The RFID icon will show when the RFID option is installed and active. If
6
installed but not active it will be shown as grey and disabled.
The last loaded configuration is referred to as the "Active Config".
7
The print head gauge is used to show how much of the print head has
8
been used in relationship to the warranty.
The ribbon gauge is used when a ribbon is installed (thermal transfer).
9
The WLAN IP address is displayed if the IP address is set (non-zero).
10
There is also a signal strength indicator next to the WLAN address.
The WLAN signal strength is displayed in dBm
11
Description
21