Media > Handling - Printronix Auto ID T800 Series Administrator's Manual

Controls how slew speed is chosen. By default, it will match Print Speed.
Automatic
Manual
Factory
When the Media > Speed > Slew Speed Control is set to Manual, this menu is
unhidden. The range and defaults are consistent with Print Speed.
Minimum
Maximum
Factory Default
IMPORTANT
Media > Handling
This option specifies the type of printing to be done.
Transfer
Direct
Factory Default
Media > Speed > Slew Speed Control
Always the same as the print speed.
Allows you to set the slew speed independently from
Print Speed by unhiding the Media > Speed > Slew
Speed menu.
Automatic
Media > Speed > Slew Speed
Same as Print Speed minimum
Same as Print Speed maximum
Same as Print Speed
Only available when Media > Speed > Slew Speed
Control is set to Manual.
Media > Handling > Print Mode
Indicates Thermal Transfer printing (ribbon installed).
Indicates Direct Thermal printing (no ribbon) and
requires special heat sensitive media.
Transfer
68