Configs > Custom - Printronix Auto ID T800 Series Administrator's Manual

You can delete one or all of your eight customized configurations. The
Factory default configuration cannot be deleted.
All
1-8
Factory Default
You can specify any one of nine configurations (1-8 saved custom
configurations or Factory) as the power-up configuration.
Factory
1-8
Factory Default
You can Enable or Disable the Auto Save feature
Disable
Enable
Factory Default
IMPORTANT
Configs > Custom
Configs > Custom > Name Config 1 ... Name Config 8
Using the virtual keyboard of the UI, you may specify a 15-character name
which can be used to refer to a configuration. The name you enter for a
configuration will be used in the Load Config, Save Config, Print Config,
Delete Config, and Power-Up Config menus. The names can only be
cleared by using the Reset Cfg Names menu.
String
Factory Default
Configs > Control > Delete Config
All configurations will be deleted, except Factory.
Specific saved configuration will be deleted.
All
Configs > Control > Power-Up Config
The Factory configuration is the power-up default.
Specific saved configuration will be the default config.
Factory
Configs > Control > Auto Save
The Auto Save feature is disabled
The Auto Save feature is enabled
Enable
The value for this menu is not part of the normal saved
configuration. Loading another configuration will affect
this value
Any 15-character string using UI keyboard.
Config 1 ... Config 8
180