Sony MG40 Series Command Reference Manual page 127

Data transmission protocol
Th is function is used to set the protocol which is to be used by the data interface.
Set
The command sets the protocol which is to be used by the data interface.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire
The command acquires the protocol which is used by the data interface.
Command format
Return format
Target
Examples of use
Compatible command
MG40 Series
Setup
mode
NPC=<Value>
<Value> 0 : TCP (Factory setting)
1 : UDP
Execution results
MG41 main unit
Setting values saved.
NPC=0
Transmission :
Return : OK000
None
Setup
mode
NPC?
NPC=<Value>
<Value> 0 : TCP
1 : UDP
MG41 main unit
NPC?
Transmission :
Return : NPC=0
None
Ethernet
Measurement
Ethernet
mode
4-39
(E)