Sony MG40 Series Command Reference Manual page 138

Numbers in the A0's: Main unit hardware-related errors
A0 Communication timeout
A1 Communication error
A2 Power supply error
A4 Version mismatch
A5 Save setting value memory error
Numbers in the B0's: Hub unit hardware-related errors
B0 Communication timeout
B1 Communication error
B2 Power supply error
Numbers in the C0's: Measuring unit-related errors
C0 Communication error
C1 System error
6-2
(E)
Communication has timed out.
A disconnected cable, broken cable, power supply trouble or
equipment failure may be to blame.
Th ere is an error in what has been communicated.
Noise, cable trouble or an equipment failure may be to blame.
Th e supply voltage is insuffi cient.
Check the power supplies.
Th e version combination does not enable operation.
Th e settings were initialized to the factory settings due to errors
in the contents of the memory where the setting values were
saved.
Communication has timed out.
A disconnected cable, broken cable, power supply trouble or
equipment failure may be to blame.
Th ere is an error in what has been communicated.
Noise, cable trouble or an equipment failure may be to blame.
Th e supply voltage is insuffi cient.
Check the power supplies.
Measuring unit has detected an error in the communication
system.
Measuring unit has detected system trouble.
MG40 Series