Sony MG40 Series Command Reference Manual page 117

Save setting values
Th is saves the current setting values in the non-volatile memory of the MG41 main unit.
Th e saved setting values are retained even aft er the power has been turned off .
Use caution with the following points since the setting values will be lost when the power of the MG41
main unit is turned off while setting values are being saved.
When a command response is returned
Do not turn off the power until the command execution results are returned.
When a command response is not returned
Do not turn off the power for at least three seconds aft er the save setting value command has been
transmitted.
 Command response (CRP command)
Save setting values
The command saves the setting values.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
MG40 Series
Setup
mode
SAV
Execution results
Entire system
Setting values saved.
SAV
Transmission :
Return : OK000
None
Ethernet CC-Link
4-29
(E)