Sony MG40 Series Command Reference Manual page 126

Subnet mask
Th is function is used to set and acquire the subnet mask.
Th e value which has been set is refl ected the next time the system is started up.
When the subnet mask is acquired aft er its setting has been changed, the subnet mask set before the change
is refl ected will be acquired.
Set
The command sets the subnet mask.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire
The command acquires the subnet mask.
Command format
Return format
Target
Examples of use
Compatible command
4-38
(E)
Setup
mode
NSM=<Subnet mask>
<Subnet mask> 0.0.0.0 to 255.255.255.255 (Factory setting: 255.255.255.0)
Execution results
MG41 main unit
Setting values saved. (Th e setting values are saved at the same time as the setting
command is executed.)
NSM=255.255.0.0
Transmission :
Return : OK000
None
Setup
mode
NSM?
NIP=<Subnet mask>
<Subnet mask> 0.0.0.0 to 255.255.255.255
MG41 main unit
NSM?
Transmission :
Return : NIP=255.255.255.0
None
Ethernet
Measurement
Ethernet
mode
MG40 Series