Operation Commands - Sony MG40 Series Command Reference Manual

4-3. Operation Commands

Operation mode
Th is function is used to switch between the setup mode and measurement mode and acquire the current
statuses.
Set
The command is used to switch between the setup mode and measurement mode.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire
The command is used to acquire the current operation mode.
Command format
Return format
Target
Example of use
Compatible command
4-4
(E)
Setup
mode
MOD=<Operation mode>
<Operation mode> 0 : Setup mode (Factory setting)
1 : Measurement mode
Execution results
MG41 main unit
Setting values not saved.
MOD=1
Transmission : (Set the measurement mode.)
Return : OK000 (Successfully completed.)
None
Setup
mode
MOD?
MOD=<Operation mode>
<Operation mode> 0 : Setup mode
1 : Measurement mode
MG41 main unit
MOD?
Transmission : (Acquire the current operation mode.)
Return : MOD=1 (Current mode is measurement mode.)
None
Measurement
Ethernet
mode
Measurement
Ethernet
mode
CC-Link
CC-Link
MG40 Series