Sony MG40 Series Command Reference Manual page 121

Command response
Th is function is used to set whether or not the execution results are to be returned in response to each
command.
Even when it is set to "no response," the response to the CRP command itself is returned.
Set
The command sets whether to return the execution results in response to each command.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire
The command acquires whether or not the execution results are to be returned.
Command format
Return format
Target
Examples of use
Compatible command
MG40 Series
Setup
mode
CRP=<Value>
<Value> 0 : No response
1 : Response (Factory setting)
Execution results
MG41 main unit
Setting values saved.
CRP=0
Transmission :
Return : OK000
CRP=1
Transmission :
Return : OK000
None
Setup
mode
CRP?
CRP=<Value>
<Value> 0 : No response
1 : Response
MG41 main unit
CRP?
Transmission :
Return : CRP=1
None
Ethernet
Measurement
Ethernet
mode
CC-Link
CC-Link
4-33
(E)