Data header
Th is function is used to set and acquire the data header.
Set data header
The command sets the data header.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire data header
The command acquires the data header setting.
Command format
Return format
Target
Examples of use
Compatible command
Data header On
(Compatible command only)
The command sets the data header to type 1.
Command format
Return format
Target
Examples of use
Compatible command
Data header Off
(Compatible command only)
The command sets the data header to "None."
Command format
Return format
Target
Examples of use
Compatible command
4-24
(E)
Setup
mode
HDR=<Header>
<Header>
00 : None
01 : Type 1 (Factory setting)
02 : Type 2
For details on the types, refer to
Execution results
MG41 main unit
Setting values saved.
HDR=01
Transmission :
Return
: OK000
None
Setup
mode
HDR?
HDR=<Header>
<Header>
00 : None
01 : Type 1
02 : Type 2
MG41 main unit
HDR
Transmission :
?
Return
: HDR=01
None
Setup
mode
None
Execution results
MG41 main unit
HON
Transmission :
Return
: OK000
HON
Setup
mode
None
Execution results
MG41 main unit
HOF
Transmission :
Return
: OK000
HOF
Ethernet
"5. Data
Formats".
Measurement
Ethernet
mode
Ethernet
Ethernet
MG40 Series