Sony MZ-NH600 Service Manual

Sony MZ-NH600 Service Manual

Portable minidisc recorder
Hide thumbs Also See for MZ-NH600:

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.0 2004.05
US and foreign patents licensed from Dolby
Laboratories.
• SonicStage, MD Simple Burner, OpenMG, "Magic Gate", "MagicGate Memory Stick",
"Memory Stick", Hi-MD, Net MD, ATRAC, ATRAC3, ATRAC3plus and their logos are
trademarks of Sony Corporation.
• Microsoft, Windows, Windows NT and Windows Media are trademarks or registered
trademarks of Microsoft Corporation in the United States and /or other countries.
• IBM and PC/AT are registered trademarks of International Business Machines Corporation.
• Macintosh is a trademark of Apple Computer, Inc. in the United States and/or other countries.
• MMX and Pentium are trademarks or registered trademarks of Intel Corporation.
• All other trademarks and registered trademarks are trademarks or registered trademarks of their
respective holders.
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
Recording and playback time
When using HMD1G (1GB disc):
Maximum 34 hours in Hi-LP stereo
When using MDW-80 in Hi-MD mode:
Maximum 10 hours and 10 min. in Hi-LP
stereo
When using MDW-80 in MD mode:
Maximum 160 min. in monaural
Maximum 320 min. in LP4 stereo
Revolutions
350 rpm to 3,000 rpm (CLV)
Error correction
Hi-MD:
LDC (Long Distance Code)/BIS (Burst
Indicator Subcode)
MD:
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sony Corporation
9-877-840-01
Personal Audio Company
2004E05-1
Published by Sony Engineering Corporation
© 2004.05
MZ-NH600
Model Name Using Similar Mechanism
MD Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
Hi-MD:
ATRAC3plus (Adaptive TRansform Acoustic
Coding 3 plus)
MD:
ATRAC
ATRAC3 − LP2/LP4
Modulation system
Hi-MD:
1-7RLL (Run Length Limited)/PRML
(Partial Response Maximum Likelihood)
MD:
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz ± 3 dB
Inputs
1)
LINE IN (OPT)
:
stereo mini-jack for analog input
(minimum input level 49 mV)
optical (digital) mini-jack for optical (digital)
input
1)
The LINE IN (OPT) jack is used to connect
either a digital (optical) cable or a line
(analog) cable.
PORTABLE MINIDISC RECORDER
AEP Model
E Model
NEW
MT-MZNH900-181
ABX-U
Outputs
i: stereo mini-jack
Maximum output (DC)
Headphones:
3 mW + 3 mW (16 Ω) (European models)
5 mW + 5 mW (16 Ω) (Other models)
Power requirements
One LR6 (size AA) alkaline battery
AC power adaptor DC 3V
Operating temperature
+5° C (+41° F) to +35° C (+95° F)
2)
Battery life
Hi-MD mode (When using a 1GB Hi-MD disc)
(Unit: approx.hours)(JEITA
When
Linear
Hi-SP
PCM
Recording
2.5
3.5
continuously
Playing
11.0
18.5
continuously
2)
When using a new Sony LR6 (size AA) alkaline
dry battery (produced in Japan)
3)
Measured in accordance with the JEITA
(Japan Electronics and Information Technology
Industries Association) standard.
– Continued on next page –
3)
)
Hi-LP
4.5
21.5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MZ-NH600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sony MZ-NH600

  • Page 1 Error correction optical (digital) mini-jack for optical (digital) Hi-MD: input When using a new Sony LR6 (size AA) alkaline LDC (Long Distance Code)/BIS (Burst The LINE IN (OPT) jack is used to connect dry battery (produced in Japan) Indicator Subcode)
  • Page 2 MZ-NH600 Hi-MD mode (When using a 60/74/80- 1 Open the clamp filters. minute standard disc) (Unit: approx.hours)(JEITA) When Linear Hi-SP Hi-LP Recording continuously Playing 17.0 20.0 continuously MD mode 2Wind the AC power cord into the clamp (Unit: approx.hours)(JEITA) filters as shown below.
  • Page 3: Table Of Contents

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 4: Servicing Notes

    MZ-NH600 SECTION 1 SERVICING NOTES NOTES ON HANDLING THE OPTICAL PICK-UP Providing the required system environment BLOCK OR BASE UNIT System requirements The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the The following system environment is required in order to use the SonicStage Ver.
  • Page 5: General

    MZ-NH600 SECTION 2 This section is extracted from instruction manual. GENERAL Looking at controls The recorder A x (stop) CANCEL button J 5-way control key USB cable connecting jack B OPEN switch L LINE IN (OPT) jack C Display window...
  • Page 6: Disassembly

    MZ-NH600 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW Note 1: The process described in can be performed in any order. Note 2: Without completing the process described in , the next process can not be performed.
  • Page 7: Case (Lower) Section

    MZ-NH600 3-2. CASE (LOWER) SECTION 1 two screws (M1.4) 1 two screws (M1.4) 2 Remove the case (lower) section in the direction of the arrow. 3-3. MAIN BOARD 2 LCD module flexible board (CN471) 3 motor flexible board (CN701) 8 OP flexible board...
  • Page 8: Case (Upper) Section

    MZ-NH600 3-4. CASE (UPPER) SECTION 1 LCD module flexible boaed (CN471) 7 case (upper) section 6 boss 3 herical torsion spring (L) 4 two step screws 2 Open the case (upper) section. 3-5. MECHANISM DECK SECTION (MT-MZNH900-181), MD STANDARD PIN...
  • Page 9: Set Chassis Assy

    MZ-NH600 3-6. SET CHASSIS ASSY 5 two screws 1 torsion coil spring (R) 2 extension spring (R) 7 set chassis assy 6 battery case 3 compression coil spring (open) 4 open slider 3-7. GEAR (BSA), GEAR (SB) 1 self tap screw 2 thrust retainer spring 3 washer (0.8-2.5)
  • Page 10: Op Service Assy

    MZ-NH600 3-8. OP SERVICE ASSY 3 Remove lead screw block assy. 4 OP service assy 2 rack spring 1 screw (M1.4) 3-9. DC MOTOR SSM18D/C-NP (SPINDLE) (M701), DC MOTOR (SLED) (M702), DC MOTOR UNIT (OVER WRITE HEAD UP/DOWN) (M703) 3 two screws (M1.4)
  • Page 11: Holder Assy

    MZ-NH600 3-10. HOLDER ASSY 4 Remove the holder assy to the direction of the arrow A . 2 boss 3 Open the holder assy. 1 boss...
  • Page 12 MZ-NH600 MEMO...
  • Page 13: Diagrams

    MZ-NH600 SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM – MD SERVO Section – OVER WRITE HEAD DRIVE IC601 (1/2) HR601 (Page 15) OVER WRITE OVER 69 HBB HEAD DRIVE WRITE 78 HB Q601, 602 HEAD 70 HBA EFM_CLK LATCH M703 OUTA...
  • Page 14: Block Diagram -Audio Section

    MZ-NH600 4-2. BLOCK DIAGRAM – AUDIO Section – REFERENCE VOLTAGE SWITCHING HEADPHONE Q351 IC352 • SIGNAL PATH VREF_IN : PLAYBACK AOUTL OUTA : REC J352 FROM IC801 (1/3) BEEP_OUTA : OPTICAL IN (MD SERVO SECTION) AOUTR : LINE IN OUTB...
  • Page 15: Block Diagram -Power Supply Section

    MZ-NH600 4-3. BLOCK DIAGRAM – POWER SUPPLY Section – SDO0 SCK0 SDO0 (Page 13) DATA CLK 63 SCK0 (Page 14) XWK1, XWK2, XWK4 (Page 14) XWK4 2 SLEEP XWK2 4 STRB XRST2 XRST2 WAKE UP SWITCH XWK1 XRST1 Q902 (Page 14)
  • Page 16 MZ-NH600 • Note For Printed Wiring Boards and Schematic Diagrams • Waveforms Note on Printed Wiring Board: Note on Schematic Diagram: IC501 8 (RFO) IC301 8 (BCLK) • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) •...
  • Page 17: Schematic Diagram -Main Section (1/9)

    MZ-NH600 • See page 28 for IC Block Diagram. 4-4. SCHEMATIC DIAGRAM – MAIN Section (1/9) – (1/9) XRST_MTR_DRV XRST_MTR_DRV SLD_CON_W C714 SLD_CON_W SLD_CON_V SLD_CON_V SLD_CON_U SLD_CON_U SLD_PWM L701 L702 SLD_PWM SLD_MON_U SLD_MON_U SLD_MON_V SLD_MON_V SLD_MON_W SLD_MON_W SLD_CON_W R706 2.2k R707 2.2k...
  • Page 18: Schematic Diagram -Main Section (2/9)

    MZ-NH600 • See page 28 for IC Block Diagrams. 4-5. SCHEMATIC DIAGRAM – MAIN Section (2/9) – (2/9) XCS_REC_DRV SUSPEND C673 SUSPEND REG_DACVREFH USB_HOLD USB_HOLD RECP RECP C668 EFM_CLK D610 EFM_CLK MA2Z748001S0 C669 C643 VOLTAGE DETECT XCS_REC_DRV IC606 +1.2V REGULATOR...
  • Page 19: Schematic Diagram -Main Section (3/9)

    MZ-NH600 • See page 16 for Waveforms. • See page 28 for IC Block Diagram. 4-6. SCHEMATIC DIAGRAM – MAIN Section (3/9) – (Page 17) (3/9) C553 C554 6.3V C523 C524 C530 0.01 (Page 18) R505 +3V REGULATOR L503 IC502 C561 10µH...
  • Page 20: Schematic Diagram -Main Section (4/9)

    MZ-NH600 • See page 28 for IC Block Diagram. 4-7. SCHEMATIC DIAGRAM – MAIN Section (4/9) – (4/9) (Page 24) TERRA_V (Page 18) Q451 RTQ035P02TR MINUS_MON GND_SW VBUS_MON C453 0.047 Q451,452 VOLTAGE LIMITER CHG_TYPE2 Q407 CHG_TYPE2 UN9214J-(TX).SO CHG_I_CTL3 CHG_I_CTL3 R463...
  • Page 21: Schematic Diagram -Main Section (5/9)

    MZ-NH600 • See page 28 for IC Block Diagram. 4-8. SCHEMATIC DIAGRAM – MAIN Section (5/9) – (Page 18) (5/9) (Page 19) L903 10µH C927 C915 100p L9001 6.3V 10µH C922 C923 C958 C928 C929 R954 R955 100p 1000p 470k 2.2k...
  • Page 22: Schematic Diagram -Main Section (6/9)

    MZ-NH600 • See page 28 for IC Block Diagram. 4-9. SCHEMATIC DIAGRAM – MAIN Section (6/9) – (Page 18) (6/8) C354 R352 220k Q353 SI1410EDH-T1 R356 100k Q351 2SC4738F-Y/GR (TPL3) REFERENCE AOUTL AOUTL VOLTAGE SWITCH AOUTR C351 R353 AOUTR XHP_STBY −1...
  • Page 23: Schematic Diagram -Main Section (7/9)

    MZ-NH600 • See page 28 for IC Block Diagram. 4-10. SCHEMATIC DIAGRAM – MAIN Section (7/9) – (7/9) R478 4.7k R476 R477 4.7k 4.7k CN471 R486 DVDD R471 JOG_B XRST2 JOG_B R472 JOG_A JOG_A SET_KEY_2 SET_KEY_2 SET_KEY_1 SET_KEY_1 R473 REC_KEY...
  • Page 24: Schematic Diagram -Main Section (8/9)

    MZ-NH600 • See page 16 for Waveforms. • See page 33 for IC Pin Function Description. 4-11. SCHEMATIC DIAGRAM – MAIN Section (8/9) – (8/9) C861 POEN_CLOSE_SW WK_DET (Page 23) SCK0 R876 SDO0 R868 SDO0 SCK0 Q803 SCK0 2SC4738F-Y/GR OPT_DET...
  • Page 25: Schematic Diagram -Main Section (9/9)

    MZ-NH600 • See page 16 for Waveforms. • See page 28 for IC Block Diagram. 4-12. SCHEMATIC DIAGRAM – MAIN Section (9/9) – (9/9) D302 MAZS051008SO +1.2V REGULATOR R308 IC302 Q301 XC6219B212MR 2SA2018TL C327 R304 B+ SWITCH 100k R301 C303...
  • Page 26: Printed Wiring Board -Main Section (1/2)

    MZ-NH600 4-13. PRINTED WIRING BOARD – MAIN Section (1/2) – : Uses unleaded solder. • Semiconductor Location Ref. No. Location D151 D301 D304 S894-1 D439 S894 PROTECT D440 DETECT D457 S894-2 Hi-MD D458 PROTECT D605 DETECT D606 D607 D608 D614...
  • Page 27: Printed Wiring Board -Main Section (2/2)

    MZ-NH600 4-14. PRINTED WIRING BOARD – MAIN Section (2/2) – : Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD (CONDUCTOR SIDE) D251 D352 D401 D471 D601 S892 M702 D602 (HALF LOCK) (SLED) D603 D604 D609 M703 D610...
  • Page 28 MZ-NH600 • IC Block Diagrams IC301 AK5356VN-L IC401 MM1655NCBE 18 17 MICR 22 RESET BAT– 25 CONVERTER MVDD 23 RF1 26 TYPE2 CONTROL MVSS 24 IAMP_CAL 27 REGISTER CCLK INTERFACE CDTI MVCM VCOM AMP_SEL 28 IAMP_CTL MRF 26 MIC POWER + –...
  • Page 29 MZ-NH600 IC501 SN761059ZQLR 42 41 35 34 33 32 31 30 29 SERIAL INTERFACE POWER CPGND VCC2 SUPPLY TEMP A+B+C+D VREF09 NPPO MALFA VCC2 AVCC2 AW+DW AWBPF TON PEAK S-MONITOR OFTRK OFTRK TON BOTM DWBPF ADIP OFTTH T-ON TON-C TWPP...
  • Page 30 MZ-NH600 IC601 SC901585VAR2 CHARGE PUMP NC A12 56 LATCH EFM BOTTOM LVDT WAKE 55 XWKO PRE DRIVER HOLD OUT CONTROL HOLD VBUS 54 VBUS LOGIC EFM TOP RST OUT BUFFER PRE DRIVER 53 WAKEC PVBUS PVBUS VBUS 52 V33UO CRST...
  • Page 31 MZ-NH600 IC701 BD6607KN 62 61 48 WI2 DECODER STANDBY DECODER PRE DRIVE PRE DRIVE PGNDW1 47 PGNDW2 46 WO2 45 ST2 VMVW1 44 VMVW2 43 VO2 42 VO2 PGNDUV1 41 PGNDUV2 40 UO2 39 UO2 38 VMU2 VMU1 VMR1 37 VMR2...
  • Page 32 MZ-NH600 IC901 SC901584EPR2 36 35 RESET 2 SERIAL RST2 PASS POWER STEP REGULATOR 3 SWITCH 2 UP-DOWN REGC2 DRIVER RST2 MUTING REG2G VREF REF2 SERIAL BUFFER REGO2 PASS REGULATOR 2 REGI2 32 DTC2 REGC1 VREF RST1 SERIAL REF2 REGO1 PASS...
  • Page 33 MZ-NH600 • IC Pin Function Description IC801 CXD2681-222GG (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description DVDD1_0 — Power supply terminal DVSS1_0 — Ground terminal DVDD1_1 — Power supply terminal DVSS1_1 — Ground terminal DVDD1_2 — Power supply terminal DVSS1_2 —...
  • Page 34 MZ-NH600 Pin No. Pin Name Description DAVDD — Power supply terminal (for D/A converter) DVDD25LPF — Power supply terminal (for D/A converter) DAVSS — Ground terminal (for D/A converter) OSCVDD — Power supply terminal (for 22 MHz OSC) USBOSCVDD —...
  • Page 35 MZ-NH600 Pin No. Pin Name Description Phase comparison output terminal for the playback EFM system master PLL FILI Filter input terminal for the playback EFM system master PLL FILO Filter output terminal for the playback EFM system master PLL CLTV...
  • Page 36 MZ-NH600 Pin No. Pin Name Description VREFL Reference voltage terminal connected to the capacitor (for the built-in D/A converter L-CH) AOUTL Built-in D/A converter L-CH signal output AOUTR Built-in D/A converter R-CH signal output VREFR Reference voltage terminal connected to the capacitor (for the built-in D/A converter R-CH)
  • Page 37 MZ-NH600 Pin No. Pin Name Description Serial data input from the EEPROM Serial data output to the EEPROM SCK0 Serial clock output to the EEPROM XGUM_ON Rechargeable battery detection signal terminal Not used BEEP Beep sound control signal output to the headphone amplifier...
  • Page 38 MZ-NH600 Pin No. Pin Name Description XRST_MTR Reset signal output to the motor driver _DRV XCS_NV Chip select signal output to the EEPROM CHG_PWM Charge current or voltage control signal output terminal IAMP_CAL Offset signal output of current sense amplifier Not used —...
  • Page 39 MZ-NH600 Pin No. Pin Name Description SCS4 Chip select signal output for ATRAC3 plus encoder communication Not used HI_Z_SLD Standby signal output terminal for the sled motor HI_Z_SPDL Standby signal output terminal for the spindle motor 291 to SET_CODE0 to...
  • Page 40: Exploded Views

    MZ-NH600 SECTION 5 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.
  • Page 41: Case (Upper) Section

    MZ-NH600 5-2. CASE (UPPER) SECTION not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-264-154-01 BADGE (HI-MD) 3-266-219-01 KNOB (5DIR) (N FNT) X-2023-287-1 CASE (UPPER) (S) SV ASSY (for BLUE SILVER) 1-805-515-11 LCD MODULE...
  • Page 42: Chassis Section

    MZ-NH600 5-3. CHASSIS SECTION mechanism deck section MAIN board Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-266-202-01 SPRING (OPEN), COMPRESSION COIL 3-238-876-04 SCREW (M1.4), TOOTHED LOCK 3-266-197-01 OPEN SLIDER 3-266-204-01 TERMINAL (+), BATTERY 3-266-196-01 CASE, BATTERY 3-266-203-01 TERMINAL (–), BATTERY...
  • Page 43: Mechanism Deck Section (Mt-Mznh900-181)

    MZ-NH600 5-4. MECHANISM DECK SECTION (MT-MZNH900-181) not supplied HR601 (over write head) M702 M703 (including HR601 (over write head) ) M701 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
  • Page 44: Electrical Parts List

    MZ-NH600 SECTION 8 ELECTRICAL PARTS LIST MAIN NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts are seldom required for routine service.
  • Page 45 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C633 1-164-943-11 CERAMIC CHIP 0.01uF C521 1-164-850-11 CERAMIC CHIP 10PF 0.5PF C634 1-125-837-11 CERAMIC CHIP 6.3V C522 1-164-850-11 CERAMIC CHIP 10PF 0.5PF C635 1-100-539-91 TANTALUM CHIP 47uF 6.3V...
  • Page 46 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C959 1-125-777-11 CERAMIC CHIP 0.1uF C818 1-165-851-91 TANTALUM CHIP 10uF 6.3V C960 1-125-777-11 CERAMIC CHIP 0.1uF C819 1-100-539-91 TANTALUM CHIP 47uF 6.3V C961 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 47 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB353 1-414-594-11 INDUCTOR, FERRITE BEAD L606 1-400-626-11 INDUCTOR 10uH FB354 1-216-864-11 SHORT CHIP L607 1-419-881-11 INDUCTOR 47uH FB355 1-414-594-11 INDUCTOR, FERRITE BEAD L608 1-400-402-21 INDUCTOR 4.7uH...
  • Page 48 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q902 8-729-427-74 TRANSISTOR XP4601 R432 1-216-864-11 SHORT CHIP R434 1-218-989-11 RES-CHIP 1/16W < RESISTOR > R435 1-218-990-11 SHORT CHIP R436 1-218-981-11 RES-CHIP 220K 1/16W R101 1-208-927-11 METAL CHIP 0.5%...
  • Page 49 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R609 1-218-977-11 RES-CHIP 100K 1/16W R711 1-218-965-11 RES-CHIP 1/16W R712 1-218-990-11 SHORT CHIP R612 1-220-804-11 RES-CHIP 2.2M 1/16W R713 1-218-953-11 RES-CHIP 1/16W R616 1-218-953-11 RES-CHIP 1/16W...
  • Page 50 MZ-NH600 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R895 1-218-977-11 RES-CHIP 100K 1/16W MISCELLANEOUS ************** R897 1-218-990-11 SHORT CHIP R903 1-218-989-11 RES-CHIP 1/16W 0 163 X-2021-785-1 OP SERVICE ASSY (ABX-U) R904 1-218-989-11 RES-CHIP 1/16W...
  • Page 51 MZ-NH600 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark ACCESSORIES ************ Earphones (1) 1-478-425-61 ADAPTOR, AC (AC-ES3010K) (Optional accessories) (Singapore only) 1-478-428-41 ADAPTOR, AC (AC-ES3010K) (Optional accessories) (Australian, New Zealand only) 3-266-466-11 MANUAL, INSTRUCTION (ENGLISH) 3-266-466-21 MANUAL, INSTRUCTION (FRENCH) (AEP)
  • Page 52 MZ-NH600 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...

Table of Contents