Sony MG40 Series Command Reference Manual page 125

Gateway address
Th is function is used to set and acquire the Ethernet gateway address.
Th e gateway address setting is refl ected the next time the equipment is started up.
Set
The command sets the Ethernet gateway address.
Command format
Return format
Target
Save setting values
Examples of use
Compatible command
Acquire
The command acquires the gateway address.
Command format
Return format
Target
Examples of use
Compatible command
MG40 Series
Setup
mode
NGW=<Address>
<Address> 1.0.0.1 to 223.255.255.254 (excluding 127.x.x.x)
(Factory setting: 192.168.1.1)
Execution results
MG41 main unit
Setting values saved. (Th e setting values are saved at the same time as the setting
command is executed.)
NGW=192.168.1.1
Transmission :
Return : OK000
None
Setup
mode
NGW?
NGW=<Address>
<Address> 1.0.0.1 to 223.255.255.254
MG41 main unit
NGW?
Transmission :
Return : NGW=192.168.1.1
None
Ethernet
Measurement
Ethernet
mode
4-37
(E)