Operational Leak Check Sheet For Teo-540-C1A Engines - Lycoming TEO-540-C1A Maintenance Manual

Operational Leak Check Sheet for TEO-540-C1A Engines

Engine Serial Number:_______________________ Engine Time:_________________________
Date Inspection Done:____________________ Inspection done by:________________________
Item
Examine the cowling, engine and
its compartment for evidence of
fluid leaks, residue, or
discoloration.
Examine all oil hoses for leaks,
wear, and secure attachment. Make
sure that the oil hoses are secure
and not vibrating. Make sure that
there are no sharp bends in the oil
hose routing and that the oil hoses
are not near heat sources that could
damage the oil hose.
Examine all fuel hoses for leaks,
wear, and secure attachment. Make
sure that all fuel hoses have
cushioned clamps securely attached
to hold the fuel hoses securely in
place to prevent excessive vibration.
Make sure that there are no sharp
bends in the fuel hose routing and
that the fuel hoses are not near heat
sources that could damage the fuel
hose.
05-20
Page 16
TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Comments
Identify and correct the
cause of any leak,
residue, or
discoloration.
Identify and correct the
cause of any leak.
Refer to the "Oil Hose
Inspection" procedure in
Chapter 72-50.
Identify and correct the
cause of any leak.
Refer to the "Fuel Hose
Inspection" procedure in
Chapter 73-10.
© 2018 Avco Corporation. All Rights Reserved
Findings/
Corrective Action
November 2018
Done