Lycoming TEO-540-C1A Maintenance Manual page 285

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
H. Disconnect the oil supply hose (Figure 4)
from the turbocharger. Remove the two
bolts, washers, and lock washers from the
oil adapter (Figure 5) at the top of the
turbocharger. Discard the lock washers.
I. Remove the oil adapter and gasket.
Discard the gasket.
J. Remove the two bolts, washers, and lock
washers from the oil drain tube assembly
(Figure 5) at the bottom of the
turbocharger. Discard the lock washers.
K. Remove the oil drain tube assembly and
gasket. Discard the gasket.
L. Remove the cotter pin from the bolt
through the support clamp bracket, top
right support rod, top support plate, and
top left support rod (Figure 6).
© 2018 Avco Corporation. All Rights Reserved
November 2018
Figure 6
Turbocharger Mounting Bracket
Figure 5
Turbocharger Hoses (Left Side View)
72-40
Page 255