Lycoming TEO-540-C1A Maintenance Manual page 151

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Step
"Alternator and Bracket Installation"
Step 32
and "Alternator Belt Installation"
Install the
procedures in Chapter 72-70
alternator,
and
alternator
belt
(Figure 31).
Alternator Bracket, Alternator, and
Step 33 Refer to Chapters 72-40 and 72-80
Install the
exhaust
system and
turbocharger
(Figure 32).
© 2018 Avco Corporation. All Rights Reserved
November 2018
Table 2 (Cont.)
Sequence of Engine Assembly Procedures
Reference
Figure 31
Alternator Belt
Figure 32
Exhaust System
Step
"Sensor Replacement Procedures" and
Step 34
"Engine-to-Firewall Wiring Harness
Install the
Installation" procedure in Chapter 72-70
sensors and
engine-to-
firewall
wiring
harness
(Figure 33).
Sensors and Wiring Harness
Step 35
Install the engine in the airframe per
instructions Chapter 72-00 in this
Install the
manual, in the TEO-540-C1A
engine in
Engine Installation and Operation
the
Manual, and applicable Airframe
airframe
Maintenance Manual.
Step 36 Complete the field run-in, engine
run-up, break-in, and flight test per
Complete
the "Field Run-In" and "Engine
the field
Initiation" chapters of the TEO-
run-in,
540-C1A Engine Installation and
engine run-
Operation Manual.
up, break-
in, and
flight test
Reference
Figure 33
72-10
Page 121