Lycoming TEO-540-C1A Maintenance Manual page 531

TEO-540-C1A Engine Maintenance Manual
Fault ID 368
Fault Placard condition time discrepancy
Description fault
This fault indicates the placard condition time for the primary and secondary channels
Root Cause differ by more than a maximum threshold. This fault will become inactive if the two
channel placard timer converge
Fault ID 369
Fault
Placard condition time invalid fault
Description
This fault indicates the placard condition time is invalid on both primary and secondary
Root Cause
channel possibly due to a non-volatile memory issue
Fault ID 370
Fault
Placard condition time invalid fault
Description
This fault indicates the engine has been operating outside of safe limits for more than the
Root Cause consecutive allowable time. The fault will become inactive if the engine operating returns
to normal
These configurable features are disabled in the system on all electronic engine configurations
Fault ID 371
Fault
Description
Root Cause
Fault ID 372
Fault
Description
Root Cause
© 2018 Avco Corporation. All Rights Reserved
November 2018
Fault Group 47
Fault Group 47
Fault Group 47
Troubleshooting Steps for Faults 368 thru 370
Fault Group 47
Troubleshooting Steps
Fault Group 47
Troubleshooting Steps
[FAULT: placard condition time
Fault Name
discrepancy]
Fault Lamp
[FAULT: placard condition time
Fault Name
invalid]
Fault Lamp
Fault Name
[FAULT: placard condition active]
Fault Lamp
Fault Name
-Reserved-
Fault Lamp
Fault Name
-Reserved-
Fault Lamp
TLO
TLO
TLO
TLO
TLO
Appendix D
Page 501