Lycoming TEO-540-C1A Maintenance Manual page 251

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
CAUTION
E. Disconnect and remove the Knock Sensor (Figure 16) and Cylinder Head Temperature
Sensor (Figure 17) from the engine cylinder. Refer to the "Sensor Replacement Procedures"
in Chapter 72-70.
Figure 16
Knock Sensor
on the Engine Cylinder
F. Remove the screws from the rocker box cover (Figure 18).
© 2018 Avco Corporation. All Rights Reserved
November 2018
USE CAUTION WHEN TOUCHING THE SENSORS AND ACTUATORS.
THEY CAN BE EASILY DAMAGED. NONE CAN BE REPAIRED. IF
ANY OF THESE ITEMS ARE DAMAGED, THEY MUST BE REPLACED.
TEO-540-C1A Engine Valve Components
Figure 17
Cylinder Head Temperature Sensor
on the Engine Cylinder
Figure 18
72-30
Page 221