Lycoming TEO-540-C1A Maintenance Manual page 156

Engine Assembly Checklist for TEO-540-C1A Engines (Cont.)
Complete the "Coil Box Installation" procedure in
Chapter 74-30.
Complete the "Ignition Lead Installation"
procedure in Chapter 74-20.
Complete the "Throttle Body Installation"
procedure in Chapter 73-20.
Complete the "Fuel Regulator Adapter Manifold
Assembly Installation" procedure in accordance
with the "Fuel Regulator Adapter Manifold
Assembly Replacement" section in Chapter 73-10.
Install new fuel hoses per the "Fuel Hose
Installation" procedure in the "Fuel Hose
Replacement" section in Chapter 73-10.
Complete the "Starter Installation" procedure in
accordance with the "Starter Replacement" section
in Chapter 72-70.
Complete the "Alternator and Bracket Installation"
procedure in Chapter 72-70.
Complete the "Alternator Belt Installation"
procedure in accordance with the "Alternator Belt
Replacement" section in Chapter 72-70.
Install the sensors per the "Sensor Replacement
Procedures" in Chapter 72-70.
Complete the "Engine-to-Firewall Wiring Harness
Installation" procedure in Chapter 72-70.
Complete the "Exhaust System Installation" in
Chapter 78-00.
Complete the "Turbocharger Installation" in
Chapter 72-40.
Install the engine in the airframe per instructions in
the TEO-540-C1A Engine Installation and
Operation Manual and applicable Airframe
Maintenance Manual.
Complete the "Add Oil to the Engine" procedure in
Chapter 12-10.
Complete an "Operational Ground Check" per
Chapter 72-00.
Complete the field run-in, engine run-up, break-in,
and flight test per the "Field Run-In" and "Engine
Initiation" chapters of the TEO-540-C1A Engine
Installation and Operation Manual.
72-10
Page 126
Item
TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Comments
© 2018 Avco Corporation. All Rights Reserved
Done
November 2018