Lycoming TEO-540-C1A Maintenance Manual page 419

TEO-540-C1A Engine Maintenance Manual
Close the FST Program
NOTICE: Do not close the program by clicking on the X in the upper right of the screen.
1. Close the FST program by clicking on the Exit button at the bottom of the screen (Figure C-
34).
Disconnect the ECU and FST
1. Turn power to the ECU OFF per instructions in the applicable aircraft manual.
2. Disconnect the CAN adapter from the airframe-supplied RCA jack in the cockpit.
3. Disconnect the NI-8473 CAN adapter (Figure C-20) from the USB port on the laptop.
© 2018 Avco Corporation. All Rights Reserved
November 2018
Figure C-34
Exit Button
Appendix C
Page 389