Lycoming TEO-540-C1A Maintenance Manual page 417

TEO-540-C1A Engine Maintenance Manual
3. From the "Retrieve ECU Faults"
drop-down menu (Figure C-29)
select one of the following
options:
• Upload TBO Fault History
• Upload Service History Faults
4. Click the OK Button on the
"Retrieve ECU Faults" drop-
down menu to start to retrieve
the selected data from the ECU.
5. The Data Table will show
streaming data from the ECU.
Clearing a Fault
1. From the "Clear ECU Faults"
drop-down menu (Figure C-30)
select one of the following
options:
• Clear TLO
• Clear Service History Faults
2. Click the OK Button on the
"Clear ECU Faults" drop-down
menu to clear the selected faults
from the ECU.
NOTICE: The data from the Data logger unit will be logged in a folder in the FST folder on the
laptop hard drive.
Retrieving Data Logger Unit Information
1. Open the FST program per the
"Start the FST Program"
procedure.
2. Click on the "Data Logger Unit"
tab (Figure C-31).
NOTICE: The destination file for
saved data is identified as
the "Log File Name" on
the "Info Tab" (Figure C-
28).
© 2018 Avco Corporation. All Rights Reserved
November 2018
Figure C-29
Retrieve DLU Data
Figure C-30
Clear ECU Faults
Figure C-31
Data Logger Unit Tab
Appendix C
Page 387