Lycoming TEO-540-C1A Maintenance Manual page 257

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Cylinder Assembly Inspection Checklist for TEO-540-C1A Engine Models (Cont.)
Item to Examine and
Corrective Action
Look for evidence of leakage
from the head-to-barrel
connection or cracks in the
barrel.
Corrective Action:
Replace any cylinder that has
leakage at the cylinder head or
barrel or cracks in the barrel.
Look for scratches in the honed
surface of the cylinder wall or
cylinder bore.
Corrective Action:
Hone the cylinder to remove the
scratches then measure the
cylinder for Average Cylinder
Diameter. Refer to the Piston
Specifications Table in Section II
of the latest revision of the
Service Table of Limits - SSP-
1776 for measurement
instructions and tolerances.
Make sure there is not any
cylinder head-to-barrel flange
movement.
Corrective Action:
Replace any cylinder that has any
cylinder head-to-barrel flange
movement.
© 2018 Avco Corporation. All Rights Reserved
November 2018
Cylinder
No.
Cylinder 1
Cylinder 2
Cylinder 3
Cylinder 4
Cylinder 5
Cylinder 6
Cylinder 1
Cylinder 2
Cylinder 3
Cylinder 4
Cylinder 5
Cylinder 6
Cylinder 1
Cylinder 2
Cylinder 3
Cylinder 4
Cylinder 5
Cylinder 6
Findings / Corrective Action
72-30
Page 227