Lycoming TEO-540-C1A Maintenance Manual page 140

Step
"Cylinder Removal" procedure in
Step 17
Chapter 72-30
Remove the
rocker
covers,
valve
rockers,
rocker
shafts, push
rods, and
shroud
tubes
(Figure 17).
Rockers, Shroud Tubes,
"Cylinder Removal" procedure in
Step 18
Chapter 72-30
Remove the
engine
cylinders
(Figure 18).
Step 19
"Piston Removal" procedure in Chapter
72-30
Remove the
pistons
(Figure 19).
72-05
Page 110
Table 1 (Cont.)
Sequence of Engine Disassembly Procedures
Reference
Figure 17
and Push Rods
Figure 18
Engine Cylinders
Figure 19
Piston
TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Step
"Connecting Rod Removal" procedure
Step 20
in Chapter 72-20
Remove the
connecting
rods
(Figure 20).
"Oil Pressure Relief Valve Removal"
Step 21
procedure in Chapter 72-50
Remove the
oil pressure
relief valve
(Figure 21).
Oil Pressure Relief Valve
Step 22
"Crankcase Disassembly" procedure in
Chapter 72-20
Separate the
crankcase
halves
(Figure 22).
© 2018 Avco Corporation. All Rights Reserved
Reference
Figure 20
Connecting Rods
Figure 21
Figure 22
Crankcase Halves
November 2018