Ecu To Fst Connection - Lycoming TEO-540-C1A Maintenance Manual

TEO-540-C1A Engine Maintenance Manual
Connect the ECU to the laptop where the FST is installed
1. Connect the USB plug end of the iE2 Field Service Tool CAN Interface (ST-530) to the USB
port on the laptop.
2. Connect the CAN Interface plug end of the iE2 Service Cable (ST-528) to the CAN Interface.
3. Connect the RCA plug end of the iE2 Service Cable (ST-528) to the airframe-supplied RCA
jack in the cockpit.
© 2018 Avco Corporation. All Rights Reserved
November 2018

ECU TO FST CONNECTION

Figure C-20
Laptop Connected to the ECU
Appendix C
Page 381