Lycoming TEO-540-C1A Maintenance Manual page 148

Step
"Crankshaft Installation" procedure in
Step 14
Chapter 72-20
Install the
crankshaft
in the
crankcase
(Figure 13).
"Crankcase Assembly" procedure in
Step 15
Chapter 72-20
Assemble
the
crankcase
halves
(Figure 14).
"Crankshaft Oil Seal Installation"
Step 16
procedure in Chapter 72-20
Complete
installation
of the
crankshaft
oil seal in
the
crankcase
(Figure 15)
Split Oil Seal and Solid-Ring Oil Seal
72-10
Page 118
Table 2 (Cont.)
Sequence of Engine Assembly Procedures
Reference
Figure 13
Crankshaft
Figure 14
Crankcase Halves
Figure 15
TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Step
"Crankshaft Trigger Gear Assembly
Step 17
and Crankshaft Idler Gear Installation"
Install the
procedure in Chapter 72-20
crankshaft
trigger gear
assembly,
crankshaft
idler gears,
fuel pump
drive shaft,
and high-
speed idler
gear
(Figure 16)
Crankshaft Idler Gear Assemblies
Step 18
"Oil Pump Installation" procedure in
Chapter 72-25
Install the
oil pump on
the
accessory
housing
(Figure 17).
Step 19 Chapters 12-10, 72-25, and 72-50 in
this manual and Airframe
Install the
Manufacturer's Maintenance Manual
accessory
housing, oil
filter, oil
cooler
bypass
valve, and
connect the
oil hoses to
the oil
cooler
(Figure 18).
© 2018 Avco Corporation. All Rights Reserved
Reference
Figure 16
Figure 17
Oil Pump
Figure 18
Accessory Housing
November 2018