Lycoming TEO-540-C1A Maintenance Manual page 211

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
(5) Refer to the latest revision of Service Instruction SI-1059 and apply the specified lubricant
to the crankshaft thrust bearing surfaces of each crankcase half (Figure 84).
Figure 84
Thrust Bearing Surfaces
of Each Crankcase Half
(6) Install the camshaft in the left crankcase half.
(7) Tie a loop of soft wire around the camshaft and left crankcase half (as shown in Figure 87)
to hold the camshaft securely in place.
Figure 86
Lubricant Application to
Camshaft Bearing Saddle in Crankcase Half
© 2018 Avco Corporation. All Rights Reserved
November 2018
Figure 85
Lubrication to Roller Tappets
and Camshaft Lobes
Figure 87
Example of Camshaft Wired to Crankcase Half
72-20
Page 181