Lycoming TEO-540-C1A Maintenance Manual page 418

NOTICE: If the data logger is not installed or not communicating with the ECU a "Data Logger
Unit was not detected" warning will be displayed (Figure C-32). Check the connection
between the data logger and the ECU and correct the problem. If the problem persists,
contact Lycoming.
3. From the "Retrieve DLU Data" drop-down menu (Figure C-33) select the following option:
• Run Time Data
• Trip Time Data
• Life Time Data
4. Click the OK button to start to
retrieve the selected data. The Data
Table will show streaming data
from the ECU.
NOTICE: The ECU data will be logged in a file using the following format:
• Decode • Data
Appendix C
Page 388
Figure C-32
Data Logger Unit Not Detected
• Year • Month
TEO-540-C1A Engine Maintenance Manual
Figure C-33
Retrieve DLU Data Drop-Down Menu
• Day • Hour • Minute • Second • AM/PM
© 2018 Avco Corporation. All Rights Reserved
November 2018