Lycoming TEO-540-C1A Maintenance Manual page 150

Step
"Intercylinder Baffle Installation"
Step 26
procedure in Chapter 72-30
Install inter-
cylinder
baffles
(Figure 25).
"Oil Drain Tube Installation"
Step 27
procedure in Chapter 72-30
Attach six
new oil
drain tubes,
one on each
engine
cylinder
head and
the
crankcase
(Figure 26).
"Intake Pipe Installation" procedure in
Step 28
Chapter 72-80
Install the
intake
pipes, each
to the
correspond-
ing cylinder
(Figure 27).
72-10
Page 120
Sequence of Engine Assembly Procedures
Reference
Figure 25
Intercylinder Baffle
Figure 26
Oil Drain Tubes
Figure 27
Intake Pipes
TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Table 2 (Cont.)
Step
Step 29
Install the
spark plugs,
coil box,
and ignition
leads
(Figure 28).
Step 30
Install the,
fuel pump,
fuel
pressure
regulator,
throttle
body, fuel
injector
rails, and
fuel hoses,
(Figure 29).
Step 31
Install the
starter
(Figure 30).
© 2018 Avco Corporation. All Rights Reserved
Reference
Procedures in Chapters 74-20 and 74-
30 in this manual
Figure 28
Coil Box, Ignition Leads,
and Spark Plugs
Procedures in Chapters 73-10 and 73-20
• Fuel Pump Installation
• Fuel Pressure Regulator
• Throttle Body Installation
• Fuel Injector Rail Assembly
Installation
• Fuel Hose Installation
Figure 29
Fuel System Components
"Starter Installation" procedure in
Chapter 72-70
Figure 30
Starter
November 2018