Lycoming TEO-540-C1A Maintenance Manual page 93

TEO-540-C1A Engine Maintenance Manual
TEO-540-C1A Engine Maintenance Manual
Engine Inspection Checklist After Propeller Strike for TEO-540-C1A Engines (Cont.)
Sequential Task
36. Replace all of the counterweight bushings on
the crankshaft with new counterweight
rollers and bushings.
37. Review the documents of all engine-
mounted accessories including the propeller
governor (if installed), etc. for continued
airworthiness instruction.
38. Assemble and install the engine. Install the
propeller and test the engine. Complete an
Operational Ground Check of the engine.
39. Complete "Field Run-In" (if applicable)
and "Engine Initiation".
40. Record maintenance findings and any
corrective action.
UNAIRWORTHY PARTS:
ADDITIONAL WORK/INSPECTIONS NECESSARY:
OUTCOME OF INSPECTION- SUMMARY NOTES:
© 2018 Avco Corporation. All Rights Reserved
November 2018
Additional
Information
Refer to Chapter
72-20 in this
manual
In accordance with
instructions in
Chapters 72-00 and
72-10.
Refer to the "Field
Run-In" and
"Engine Initiation"
chapters in the TEO-
540-C1A Engine
Installation and
Operation Manual.
Corrective Action
Done/Comments
05-50
Page 63