Buckle Chute Stopper Angle Adjustment - Horizon Fitness PF-P3100 Manual

3 Adjusting and Checking Procedures

3 - 1 Buckle Chute Stopper Angle Adjustment

503013
5_4_1A
Check the folded sheets which was fed
correctly.
- Check the fold skew.
- Determine which stopper requires adjustment.
Adjust the 1st buckle chute stopper
angle.
- Pull out the buckle chute and open the top cover. (Fig.1)
- Loosen the timing pulley on the rear of the 1st buckle
chute and adjust the stopper angle. (Fig.2) (Do not
loosen the timing pulley on the handwheel side as it
is a reference side.)
Adjust the 2nd buckle chute stopper
angle.
- Loosen the timing pulley on the rear from the square
window for adjustment at the bottom of the buckle
chute unit, and adjust the stopper angle. (Fig.3) (Do
not loosen the timing pulley on the handwheel side as
it is a reference side.)
Check the stopper home position.
- Insert the scale from the entrance of the buckle chute
and set the stopper at 57 mm (2.2"). The stopper should
be leveled at the front and rear.
- Align the stopper pointer to the left-most lamp on the
buckle chute. (See Section 1 - 13 for pointer adjustment)
(Fig.4)
3 - 1 Buckle Chute Stopper Angle Adjustment
Pull out the buckle chute to the arrow direction
slowly until it stops. See Section 1-3-1 for
buckle chute separation.
Buckle Chute
Fig.1 Buckle Chute
1st buckle adjustment 1st buckle adjustment
Timing Pulley
Adjust the stopper angle
using the timing pulley on the rear.
Sheet Sheet Sheet Sheet Sheet
Stopper
Do not loosen. Do not loosen.
503013
3_1_1B
Fig.2 Angle Adjustment 1
2nd buckle adjustment 2nd buckle adjustment
Top Cover
Bottom Plane
503013
3_1_1A
Fig.3 Angle Adjustment 2
Set the first and second stopper at 57 mm (2.2")
Allen Wrench from the inner side of the buckle chute. Align the
(2mm/0.08")
stopper to the left-most lamp on the buckle chute.
See Section 1-13.
57 mm (2.2")
Stopper Stopper Stopper
Stopper Stopper Stopper
This is
registering
57 mm (2.2")
side.
Fig.4 Buckle Chute Stopper Home Position
3-2
Square window for 2nd stopper
adjustment
Do not loosen. Do not loosen.
This is the
reference side.
Timing Pulley
Allen Wrench
(2mm/0.08")
Adjust the stopper
angle using the timing
pulley on the rear.
503013
3_1_1C
Stopper Pointer
LED LED LED LED
1st Buckle
Stopper Pointer
2nd Buckle 2nd Buckle 2nd Buckle
503013
3_1_1D