Mechanism Of Folding - Horizon Fitness PF-P3100 Manual

1 Installation and Mechanism

1 - 4 Mechanism of Folding

Sheets are fed.
- The feed roller rotates and feeds sheet one by one
to the buckle chute. (Fig. 1)
The sheet hits the stopper.
- The sheet hits the stopper on the 1st buckle chute
and stops. (Fig. 2)
The sheet is bent slightly.
- The sheet stopped by the stopper is bent, and the
fold rollers catch the sheet bend. (Fig. 3)
- When the folding speed is set to "High", the amount of
sheet bend is slightly changed. Set the stopper posi-
tion 1 mm (0.04") shorter than the normal setting.
- When the heavier sheet is folded, the amount of sheet
bent becomes smaller. Set the folding speed to "High"
to create bigger sheet bend.
The sheet is folded.
- The fold rollers catch the bending part of sheet
and sheet is folded.
- The fold position changes depending on the stop-
per position.
1
Installation and Mechanism
Feed Roller
Double Feed Stop Plate
Fig.1
Stopper
1st Buckle Chute
2nd Buckle Chute
Fig.2
1 - 4 Mechanism of Folding
Sheets
Feed Roller
Fold Roller
503013
1_4_1A
503013
1_4_1C
Bending Part
Stopper
Fold Roller
503013
1_4_1B
Fig.3
503013
1_4_1D
Fig.4
1-5
1-5