Irregular Size Sheet Folding - Horizon Fitness PF-P280 Manual

2. Operation Procedure

2-2 Irregular Size Sheet Folding

1.
Measure size of folding edge with ruler.
2.
Complete step 1 to 6 in "2-1 Operation
Procedure" (Page 8 to 9).
- When sheet is piled so that printed
surface faces downward, printed
surface comes inside after folded.
3.
Set stopper position for first folding.
- Start folding with referring to step 8
through 12 in "2-1 Operation Proce-
dure" (Page 10 to 11).
CAUTION
Stop turning stopper handle when
orange mark comes to 10 mm (0.4") to
the both end. Do not turn any further.
Orange
Mark
Stopper Position for First Folding
For Gate Folder - 1/4 of sheet Width
For Accordion Fold - 1/3 of sheet Width
For Letter Fold - 1/3 of sheet Width
For Short Fold - 1/4 of sheet Width
For Parallel Fold - 1/4 of sheet Width
For Single Fold - 1/2 of sheet Width
12