Install Date; Initialization-Clear All Data; Initialization-Clear Individual Data - Olivetti d-Color MF651 Service Manual

12. SERVICE MODE
12.8.7

Install Date

A. Use
• To register the date the main body was installed.
• Upon setup.
B. Procedure
1. Call the Service Mode on the screen.
2. Select the key as follows.
[System 1] [Install Date].
3. Enter the date (Year 4 digit
4. Touch [Entry] to set the date of installation.
12.8.8

Initialization-Clear All Data

A. Use
• To initialize the setting data.
• For details on items to be cleared, see "CONTENTS TO BE CLEARED BY RESET
FUNCTION."
See P.640
NOTE
• When removing or installing the hard disk after registering the data below, be sure
to clear the data.
Referring data: One-touch registration, user authentication/account track.
B. Procedure
1. Call the Service Mode to the screen.
2. Select the key as follows.
[System 1] [Initialization]
3. Press the Start key.
4. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
12.8.9

Initialization-Clear Individual Data

• Clear Individual Data enables you to select and clear multiple items at a time.
A. Copy Program Data
(1) Use
• To clear data registered as copy program.
• Use this feature to clear all copy program data at a time.
(2) Procedure
1. Select the key as follows.
[System 1] [Initialization]
2. Press the Start key.
3. When [OK] is displayed, turn off the main power switch and turn it on again more than
10 seconds after.
526
Month 2 digit date 2 digit) from the 10-key pad.
[Clear All Data].
[Copy Program Data].
Service Manual
Field Service Ver. 2.0 Jul. 2009
Y110571-1