Ftp Setting-Connect Proxy - Olivetti d-Color MF651 Service Manual

Field Service Ver. 2.0 Jul. 2009

12.17.10 FTP Setting-Connect Proxy

A. Use
• To set whether or not to access the server via proxy server.
B. Procedure
• The default setting is OFF.
12.17.11 FTP Setting-Proxy Server
A. Use
• To set the address and the port No. of the proxy server.
B. Procedure
<Server Address>
• Enter an address using IPv4, IPv6, or FQDN format.
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
12.17.12 FTP Setting-Connection Setting
A. Use
• To set the port No. and the time for timeout when accessing the FTP server, and also to
set whether or not to enable PASV mode.
• To use when accessing the FTP server.
• To use when connecting by the PASV (passive) mode (FTP server side will inform the
connection port before connecting).
B. Procedure
<Port Number>
• Enter the value between 1 and 65535 using the 10-key pad.
<Connection Time Out>
• Enter the value between 1 and 60 (min.) using the 10-key pad.
<PASV Mode>
• The default setting is OFF.
12.17.13 Forwarding Access Setting-User ID
A. Use
• To register the user ID for accessing the program server where firmware is to be stored.
B. Procedure
1. Select [User ID].
2. Enter the user ID (up to 64 one-byte characters) on the on-screen keyboard.
Y110571-1
ON
ON
Service Manual
12. SERVICE MODE
"OFF"
"OFF"
617