5. OTHER MAINTENANCE ITEMS
[3]
[2]
B. Reinstall procedure
NOTE
• When replacing the original glass moving unit, clean the glass surface of the orig-
inal glass moving unit.
Clean the inside of the glass well since it cannot be easily cleaned once it is
mounted.
1. When mounting the new original glass moving unit, take out the original glass moving
unit cover.
[1]
[2]
104
8. Remove four screws [1], and remove
[1]
the original glass moving unit [2].
NOTE
• Use care not to lose the spacer [3]
mounted on each screw.
• Write down the type and numbers
of the spacer [3].
The same numbers of the spacer of
the same type with what is written
should be mounted when replacing
the original glass moving unit.
[3]
A0P0F2C050DA
2. Set the spacers [1] and mount the
original glass moving unit [2] to the
machine.
NOTE
• Make sure to set the spacers [1]
which are exact same type and
number as before removing the
original glass moving unit.
[1]
A0P0F2C051DA
3. Tighten four screws [1] loosely and
[1]
adjust the height of the original glass
moving unit.
See P.644
A0P0F2C052DA
Service Manual
Field Service Ver. 2.0 Jul. 2009
Y110571-1