5. OTHER MAINTENANCE ITEMS
5. Apply the heat resistant conductive grease (SANKOL ECG-25) to the surface [1] where
the brush roller shaft contacts the bearings.
NOTE
• Be sure to use heat-resistant conductive grease.
• Do not allow the grease to contact the brush roller.
• Do not disassemble any parts other than those described in the above procedure.
[1]
NOTE
• Take care so that harness in the fusing unit does not get caught between parts
when assembling the parts.
228
Service Manual
Field Service Ver. 2.0 Jul. 2009
[1]
A00JF2C612DA
Y110571-1