Olivetti d-Color MF651 Service Manual page 725

Field Service Ver. 2.0 Jul. 2009
JAM
JAM type
code
72-18 FS transport
section
72-19
Y110571-1
Detection timing
<When FS-526 is installed>
• The 2 staples stacker sensor (PS3) is not
turned ON even after the set period of
time has elapsed after the Z-fold punch
regist sensor (PS2) is turned ON by the
paper.
<When FS-527 is installed>
• The registration sensor (PS10) is not
turned ON even after the set period of
time has elapsed after the paper passage
sensor/2 (PS2) is turned ON by the paper.
• The registration sensor (PS10) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
<When FS-526 is installed>
• The 2 staples stacker sensor (PS3) is not
turn OFF even after the set period of time
has elapsed after it turns ON.
<When FS-527 is installed>
• The lower path sensor (PS9) is not turned
ON even after the set period of time has
elapsed after the registration sensor
(PS10) is turned ON by the paper.
• The lower path sensor (PS9) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
• The upper path sensor (PS8) is not turned
ON even after the set period of time has
elapsed after the registration sensor
(PS10) is turned ON by the paper.
• The upper path sensor (PS8) is not turn
OFF even after the set period of time has
elapsed after it turns ON.
• The lower path sensor (PS9) is not turned
ON by the paper even after the set period
of time has elapsed after the switchback
operation caused by the conveyance
motor (M4) is completed.
• After the switchback operation caused by
the conveyance motor (M4) is completed,
the lower path sensor (PS9) is not turned
OFF even after the set period of time has
elapsed after PS9 is turn ON by the paper.
Service Manual
17. JAM DISPLAY
Misfeed processing Ref.
location page
Front door P.691
Horizontal convey-
ance cover
Front door P.692
665