4. PERIODICAL MAINTENANCE PROCEDURE
4.10.7
Replacing the tray 4 feed roller/tray 4 pick-up roller
A. Periodically replaced parts/cycle
• Tray 4 feed roller: Every 300,000 counts
• Tray 4 pick-up roller: Every 300,000 counts
B. Procedure
1. Slide out the tray 4.
[2]
[1] [2]
64
[1]
[3]
[1]
[2]
A00JF2C033DA
A00JF2C026DA
Service Manual
Field Service Ver. 2.0 Jul. 2009
2. Remove two C-clips [1] and two
bearings [2], and remove the feed
roller/pick-up roller assy [3].
3. Remove the C-clip [1], and remove
the tray 4 feed roller [2].
Y110571-1