Olivetti d-Color MF651 Service Manual page 479

Field Service Ver. 2.0 Jul. 2009
(4) Destination Check Display Function
<Use>
• To set whether or not to display the list of specified addresses when sending the fax.
<Procedure>
• The default setting is OFF.
(5) Confirm Address (TX)
<Use>
• To set whether to use Confirm Address (the machine displays the screen where the user
reenters the fax number for confirmation when the user faxes by entering the fax number
directly with the keys).
<Procedure>
• The default setting is OFF.
(6) Confirm Address (Register)
<Use>
• To set whether to use Confirm Address (the machine displays the screen where the user
reenters the fax number for confirmation when the user faxes by entering the fax number
directly with the keys).
<Procedure>
• The default setting is OFF.
B. Memory RX Setting
• It will be displayed only when the following setting is set to "ON."
[Service Mode]
• It will not be displayed when [PC-FAX RX Setting], [Forward TX Setting] or [TSI User Box
Setting] is set to "ON."
• It will not be displayed when the following setting shows that vendor is mounted.
[Service Mode]
(1) Use
• To set whether to use the forced memory RX function.
• To store the received text in the hard disk without printing, and print it out when ordered.
(2) Procedure
• The default setting is NO.
• Enter the password (up to 8 digits) for printing when set to [ON].
Y110571-1
ON
ON
ON
[FAX] [System] [Display Setting]
[Billing Setting] [Management Function Choice]
Service Manual
10. UTILITY
"OFF"
"OFF"
"OFF"
[Compulsory Memory RX]
419