System Settings-Restrict User Access - Olivetti d-Color MF651 Service Manual

10. UTILITY
10.6.6

System Settings-Restrict User Access

A. Copy Program Lock Settings
(1) Use
• To set the prohibition for modifying the registered copy program.
(2) Procedure
1. Touch the key for the appropriate copy program.
2. Touch [OK].
B. Delete Saved Copy Program
(1) Use
• To delete the registered program job.
(2) Procedure
1. Touch the appropriate program job.
2. Touch [Delete].
3. Touch [Yes] on the check screen to delete the program job.
C. Restrict Access to Job Settings
• It will not be displayed when the following setting shows that authentication device 1 or
vendor 2 is mounted.
[Service Mode]
(1) Changing Job Priority
<Use>
• To set whether to allow or restrict the change on the print priority for the job.
<Procedure>
• The default setting is Allow.
(2) Delete Other User Jobs
<Use>
• To set whether to allow or restrict job delete by other users when the user is authenti-
cated.
<Procedure>
• The default setting is Restrict.
(3) Registering and Changing Addresses
<Use>
• To set whether to allow or restrict the change of the registered address.
<Procedure>
• The default setting is Allow.
NOTE
• [Allow] cannot be selected when the following setting is set to "ON".
[Administrator Settings]
308
[Billing Setting] [Management Function Choice]
"Allow"
Allow
"Allow"
[Security Setting]
Service Manual
Field Service Ver. 2.0 Jul. 2009
Restrict
"Restrict"
Restrict
[Enhanced Security Mode]
Y110571-1